List All Pages
foldunfold
Table of Contents
Inleiding
Start Phatch op
De eerste actielijst maken
Over afbeeldingen en actielijsten
De Afbeelding Verschalen
Pas Afgeronde Hoeken en Schaduw toe
Altijd Opslaan op...
The Amount parameter is present in many actions. It allows you to blend with a certain percentage the result of the action with the source image. For example if you choose 100%, the action will be...
Maximize (normalize) image contrast.
Cutoff
This action calculates a histogram of the input image, removes cutoff percent of the lightest and darkest pixels from the histogram, and remaps the image...
This action only makes sense for transparent images (png, gif, …).
colour
The colour which will be put under the transparent image.
opacity
The opacity of the colour above. For example if you use...
All, Left, Right, Top and Bottom
The options All, Left, Right, Top and Bottom behave all in the same way. For every option you can click on the first drop-down box to select a standard value or...
Amount
Adjust brightness from black to white:
-100%: black
0%: original image
100%: white
This action does NOT rescale the image, it only crops it or expands it with empty pixels with the background colour. Use the scale action for that purpose. If you want to add a border of a certain...
Source profile
Source profile to use for the conversion
Destination profile
Destination profile to use for the conversion
Intent
Rendering intent to use for the conversion. Possible values...
Colorize grayscale image. This action calculates a colour wedge mapping all black pixels in the source image to the first colour, and all white pixels to the second colour.
Black
Map all black...
(New in Phatch 0.2)
Options
Select Color By
There are two main possibilities: or you select by a specified color value or by the color of one of the corner pixels.
Color Value
The value of the...
For each pixel in the input image, this action copies the most common pixel value within a radius to the output image.
Radius
Defines the area with which the action operates.
Amount
Read here.
(New in Phatch 0.2)
Use this action to draw a contour around image edges. It is different from the Border action. The contour action draws only the border around the shapes within the image, while...
The contrast action is used to control the contrast of an image, similar to the contrast control on a TV set.
Amount
This value has the following range:
-100% gives an solid grey image
0 gives the...
Mode
Phatch supports the following image modes:
Monochrome (1-bit pixels, black and white)
Grayscale (8-bit pixels, black and white)
RGB (3x8-bit pixels, true colour)
RGBA (4x8-bit pixels, RGB...
Options
The options of the Copy action define where the file will be copied. As an example I will give the file "path/to/source/image.jpg" between brackets. Mostly you will want to use...
(New in Phatch 0.2)
Options
Auto Crop
If this is checked, all other values are ignored. Phatch will find the bounding box and automagically crop the image. This is especially useful with the Color...
Convert the image to grayscale. Note that this action was previously (pre 0.2) known as grayscale action!
Amount
Read here.
Filter
This action provides the following filters: blur, contour, detail, edge enhance, edge enhance more, emboss, find edges, smooth, smooth more and sharpen.
Repeat
How many times this filter...
Equalise the image histogram. This action applies a non-linear mapping to the input image, in order to create a uniform distribution of grayscale values in the output image.
Amount
Read here.
Equalize the image histogram. This acction applies a non-linear mapping to the input image, in order to create a uniform distribution of grayscale values in the output image.
Amount
Read here.
This actions downsizes and crops the image to the requested aspect ratio and size.
Align Horizontal
Describes the horizontal alignment by percentage: from 0% (left), 50% (middle) to 100%...
(New in Phatch 0.2)
What this does and how it works
The purpose of this action is to add GeoTags (exif location tags) to your photographs. The action reads a GPX file which contains time and...
Convert the image to grayscale.
Amount
Read here.
(New in Phatch 0.2)
This action adds a highlight effect to your image. You can combine it with a Mask or Round action for a nice button effect.
Just like watermark and mask, highlight has a...
Invert the colors of the image, which is also sometimes described as the 'negative' image.
Amount
Read here.
(Changed in Phatch 0.2)
With this action you can turn your image into a text or give it a new shape or custom borders. You can combine it with a Shadow action afterwards for a nice result.
Use the...
For each pixel in the input image, this action copies the largest pixel value within a radius to the output image. The resulting image will probably be brighter.
Radius
Defines the area with which...
For each pixel in the input image, this action copies the median pixel value within a radius to the output image.
Radius
Defines the area with which the action operates.
Amount
Read here.
For each pixel in the input image, this action copies the smallest pixel value within a radius to the output image. The resulting image will probably be darker.
Radius
Defines the area with which...
This action offsets the content of the image by the given distances. Image content wraps around the edges.
Horizontal Offset
Vertical Offset
Amount
Read here.
This action comes with good default parameters. If you want to change them, you will need some experimentation. The best way to study this action, is to put all values on zero and try them one by...
Reduce the number of bits for each colour channel.
Amount
Read here.
Radius
Defines the area with which the action operates.
Rank
This value gives the rank by percentage. For each pixel in the input image, the rank action sorts all pixels within a radius by pixel...
(Names changed in Phatch 0.2)
A use case is described in this tutorial.
Depth
The depth of the reflection which can never be larger than the height of the image.
Gap
The gap between the image and...
Options
The options of the Copy action define where the file will be renamed. As an example I will give the file "path/to/source/image.jpg" between brackets. Mostly you will want to use...
Angle
This action rotates an image the given number of degrees counter clockwise around its centre.
Resample Image
Same as in the Scale action.
Expand
If true, indicates that the output image...
This action creates rounded corners, which is nice for online images or thumbnails.
Radius
The radius of the rounded corners.
Top Left Corner
Top Right Corner
Bottom Left Corner
Bottom Right...
Amount
Adjust saturation from grayscale to high:
-100%: grayscale
0%: original image
100%: image with highly saturated (intense) colours
(TIFF compression new in Phatch 0.2)
Options
The options of the Save action define where the file will be saved. As an example I will give the file "path/to/source/image.jpg" between...
This action will only save the metadata to the file, not any image manipulation. This is handy when you want to save the metadata in a lossless way.
Options
Filename
The filename without the folder...
This action will only save the metadata to the file, not any image manipulation. This is handy when you want to save the metadata in a lossless way.
Options
Filename
The filename without the folder...
Width
Width of the image. If the width is given in inch, cm or mm, it will be calculated based on the dpi.
Height
Height of the image. If the height is given in inch, cm or mm, it will be...
Horizontal Offset
Horizontal offset of the shadow from the image. Can be positive or negative.
Vertical Offset
Vertical offset of the shadow from the image. Can be positive or negative.
Border
In...
(New in Phatch 0.2)
This action transform an image into a grayscale pencil drawing.
Options
Details Degree
The greater the value, the wider and darker the lines and shadows will become. Common...
Treshold
Invert all pixel values above the given threshold.
Amount
Read here.
Treshold
Invert all pixel values above the given threshold.
Amount
Read here.
foldunfold
Table of Contents
Index
Third Party Actions
Source Code
Index
Auto Contrast - Maximize image contrast
Background - Put colour under transparent image
Border - Variable border to the...
Text
The text which will be written on the image. If you want to put a logo on images, use the watermark action instead.
Horizontal Offset
If you give a positive offset it is taken from left, a...
Method
This action supports two different operations:
flip image horizontally or vertically
rotate image 90, 180 or 270 degrees
Amount
Read here.
(Changed in Phatch 0.2)
Options
Mark
Mark is the image used for watermarking. Often it is a logo. Simply click on highlight and a preview dialog (new in 0.2) will appear.
Note: The Mark field can...
(New in Phatch 0.2)
Options
Tag
The name of the exif or iptc tag. It should always start with "Exif." or "Iptc.". You can copy and paste names from the Image Inspector.
Value
The new value of the...
Introduction
To achieve the image at the left, we first to think what we need to do and in which order. First we need to apply rounded corners and afterwards to make a reflection, otherwise the...
http://photobatch.stani.be
There are many ways to Rome
Translate Phatch in your language. (If you're native English, please review this site.)
Blog about Phatch, digg it and put a link to http://photobatch.stani.be
Help...
foldunfold
Table of Contents
Einführung
Phatch starten
Die erste Action List erzeugen
Über Images und Action Lists
Bilder skalieren
Abgerundete Ecken und Schatten hinzufügen
Immer eine Aktion...
Documentation
Python Api
How to write your own action?
Roadmap
The release schedule for Phatch will be synchronised to the one of Ubuntu.
Phatch 0.2 (oct 2008, targeted at Ubuntu Intrepid...
Phatch is designed to support multiple exif tools, as not all are easily available on all platforms. In the first phase Phatch will start with pyexif2, but later others might follow (such as...
These are contributions by other people. They might be included in a next Phatch release, but are already available for public testing.
Actions
Copy these into your ~/.phatch/actions folder to...
Questions
What is the need of a separate rename action if we can use the save action for renaming and to enumerate pictures?
The rename and save actions are different. Rename does what it is says:...
Overview
Actions: resize, rotate, invert, flip, watermark, shadow, rounded corners and much more!
Drag & drop of actions
Enable & disable actions
Can copy folder hierarchies
Python...
Receive forum updates by email, subscribe here.
module "forum/ForumRecentPostsModule"
foldunfold
Table of Contents
Introduction
Start up Phatch
Creating the first action list
About images and action lists
Resize the Image
Apply Rounded Corners and Shadows
Always Save At the...
Cette page est en cours de traduction.
foldunfold
Table of Contents
Introduction
Démarrer Phatch
Créer la première liste d'actions
À propos des images et des listes d'actions
Redimensionner...
If you are allowed to edit pages in this Site, simply click on edit button at the bottom of the page. This will open an editor with a toolbar pallette with options.
To create a link to a new page,...
Stable releases
Ubuntu/Debian
Download the deb installer from the Phatch homepage. (Look for the Free Download link.) Open it with Gdebi by double clicking it. Ubuntu/Debian will take care of all...
foldunfold
Table of Contents
Menu
File
New
Open
Save
Save As
Export
As droplet…
Quit
Recent
Edit
Add
Remove
Enable
Disable
Up
Down
View
Droplet
Show Description
Expand All
Collapse...
Who can join?
Anyone who wants to help with the documentation of phatch can join.
Join!
So you want to become a member of this site? Tell us why and apply now!
foldunfold
Table of Contents
Introduction1
Running Phatch as a droplet
Droplet Shortcuts
Create Droplets From:
Action List Droplet:
Recent Action Lists Droplet:
Phatch Image Inspector...
This is the full proprosal from the blueprint for having photo loaders as actions.
1. Reasoning
There are a few reasons to have photo loading moved into actions. The sum of these is flexibility for...
Introduction
Phatch is written in Python and ships with an api so it can also be used as a library. In that sense it is a shell around the Python Imaging Library on which it is based.
Get...
English
http://www.linux.com/feature/133151?
Virtually any photo manager lets you perform mundane tasks like adjusting contrast, adding a watermark, and applying effects to your photos. But even...
Introduction
To achieve the image at the left, we first to think what we need to do and in which order. First we need to apply rounded corners and afterwards to make a reflection, otherwise the...
I will be creating this page this week for the Screenshot Tour of the Phatch 0.1.3 Graphical User Interface. I have all the screenshots, and will be working on knitting this page together, from...
Workflow
Phatch can be used as a server application. The idea is that you prepare the action lists with the gui and that you can execute them on any server with only python-imaging installed. For...
Contents
Welcome
Install
Tutorials
Features
Actions
Exif Image Inspector
User Interface
Variables
Server
Developpers
Contribute
Extensions
Reviews
FAQ
Recent changes
Page...
Members:
Moderators
Admins
english
Miniatuurafbeeldingen
Miniatuurafbeeldingen met ronde hoeken en schaduw
Lees de handleiding (français | deutsch | english).
Haal de actielijst op.
Minituurafbeeldingen met 3d...
home
documentation
translate
support
launchpad
code
bugs
blueprints
forum
help
What is a Wiki?
How to edit pages?
How to join?
Site members
List all pages
Page Tags
.
Coming soon for Phatch 0.2
nederlands
Thumbnails
Thumbnails with rounded corners and shadow
Read the tutorial (français | deutsch | nederlands).
Download the action list.
Thumbnails with 3d perspective, watermark,...
Introduction
In the options of some actions you will find notations like "<dpi>" , "<filename>", "<folder>",… Everything what is between the brackets, is a variable. The value...
arabic | chinese | espagnol | francais | deutsch | italiano | nederlands | portugues | russian (google translate)
Phatch is an user friendly, cross-platform Photo Batch Processor and Exif Renamer...
foldunfold
Table of Contents
Introduction
What's a "Droplet"?
Disclaimer: This page is under construction and may still need correction. Use with care or come back soon!
Introduction
After...
According to Wikipedia, the world largest wiki site:
A Wiki ([ˈwiː.kiː] <wee-kee> or [ˈwɪ.kiː] <wick-ey>) is a type of website that allows users to add, remove, or otherwise edit...
foldunfold
Table of Contents
Introduction
Understanding how things work
Common
Model
View
Icon
Custom example
Common
Model
View
Advanced features
Cache
Rules
Coding style
Fields
Info and...
